Since 1977 Wittur supplies the lift industry with versatile and high-quality doors.
Since 1977 Wittur has been providing the lift industry with versatile and high-quality doors. More than 30 years later Wittur is the leading company in the lift doors segment, with state-of-the-art technical solutions and unparalleled product range. Regardless of whatever your lift requires - a round door with panoramic panels rather than a straight or a folding one - Wittur can supply the best solution for your needs.
Research for innovative solutions and rigid control of product quality are key features of Wittur Safeties. 
Wittur offers a wide range of car and counterweight frames. Modularly conceived, these components are very flexible in terms of rated load, height and width. The wide range of accessories includes safety gears, suspension pulleys, compensation chain and travelling cable hangers, allowing configurations suitable for different shaft layouts, lift designs and rated speeds. Wittur can also supply special frames for tailored projects.
Research for innovative solutions and rigid product quality control are key features of Wittur Safeties.
According to EN81-1/2 A3 and EN81-21 A1 (new lifts in existing buildings), new lifts installed after January 1st 2012 must be equipped with a system to prevent a car moving away from the floor with the landing door not in the locked position and the car door not in the closed position.
Since 1977 Wittur supplies the lift industry with versatile and high-quality doors..jpg)
Since 1977 Wittur supplies the lift industry with versatile and high-quality doors.
Since 1977 Wittur supplies the lift industry with versatile and high-quality doors.
July 8th-10th, Paris
Wittur at Elevcon 2014
The 20th International Congress on Vertical Transportation Technologies, probably one of the most significant gatherings in the elevator professional calendar, was held in Paris at Novotel Eiffel from 8th to 10th July, 2014. The congress, organized by IAEE, the International Association of Elevator Engineers, was sponsored by Otis and was attended by 165 participants from 26 countries and was headed by Mr. Ami Lustig from Israel. A remarkable program of 38 presentations by leading experts from all over the world within the vertical transportation industry focused on some important topics including:
- Energy efficiency requirements for elevators worldwide
- Traffic calculation and simulation
- High rise solutions
- Evacuation in case of fire
- Norms and directives
Wittur Group was present with Thomas Lernet and Wolfgang Adldinger. In the context of the poster session Mr. Lernet presented the “Evolution of Elevator Doors for EN 81-20/50 Compliance”. Focus of the presentation was the newly introduced HYDRA EVO, the evolution of Hydra door, which is one of the first elevator products introduced on the market that is already compliant with EN81-20/50.
READ MORE
August 12th-13th, São Paulo, Brazil
Safety in Motion: Wittur at Expo Elevador 2014
Wittur will be present at EXPO ELEVADOR 2014 exhibition, scheduled for August 12th and 13th at Centro de Exposições Imigrantes in São Paulo, Brazil.
Visitors of Wittur stand (nr. A02) will be able to experience some key components among the wide range of Wittur solutions, namely:
Under the slogan “Safety in motion” Wittur will be available to present you the latest trends in the worldwide elevator world and how Wittur solutions can benefit your business growth.
Wittur Ltda, based in Londrina, will highlight the extension project, which will double its production capacity in the course of year 2015. Representatives from all Wittur companies in South America will also be available at Wittur Stand, including Wittur Argentina and Wittur Colombia.
We will be delighted to meet you at Wittur stand (A02) at Expo Elevador 2014!
Visitors of Wittur stand (nr. A02) will be able to experience some key components among the wide range of Wittur solutions, namely:
- Wittur MRL W-Line machine roomless elevator package
- Wittur L375 car frame (hydraulic) package
- Wittur CITY ELECTRICO elevator package
- Augusta EVO, the Wittur quality door for the residential elevator market, designed to comply with EN81-20/50 norms
- Hydra EVO, the evolution of Wittur Hydra, the elevator door system designed to be flexible. The design of EVO version is already compliant with EN81-20/50 norms and allows the use of screw guns for fast assembly
- WSG09.2, the “pancake” form factor gearless machine from Wittur
- WSG S3.1 and WSG S2.3, the compact gearless machine for MRL applications from Wittur
- A selection of safety gears from the wide range of Wittur safety devices
Under the slogan “Safety in motion” Wittur will be available to present you the latest trends in the worldwide elevator world and how Wittur solutions can benefit your business growth.
Wittur Ltda, based in Londrina, will highlight the extension project, which will double its production capacity in the course of year 2015. Representatives from all Wittur companies in South America will also be available at Wittur Stand, including Wittur Argentina and Wittur Colombia.
We will be delighted to meet you at Wittur stand (A02) at Expo Elevador 2014!
READ MORE
Tel Aviv, February 12th, 2014
Second Conference on Standardization and Lifts Engineering
The Second conference on Standardization and Lifts Engineering was held on February 12th, 2014 at the City Tower Events Centre, Raman Gan, Tel Aviv, Israel.
The conference was organized by The Standards Institutions of Israel; lectures were given by experts from all over the world.
Mr. Wolfgang Adldinger from Wittur gave a presentation about “Equipment and compliance of Elevators to Amendment 3”, which illustrated the UCM concept and the various technical solutions to achieve an even higher level of safety in every elevator installation.
UCM (Unintended Car Movement) is defined as a non-commanded car movement with open doors away from the landing position in up/down direction: the cause of some accidents in elevator installations.
EN 81-1/2+A3 standard, published in December 2009 and mandatory since 01.01.2012, introduces new safety devices in new elevator installations to detect a car movement while the elevator is on a floor with open doors. In case of movement, the UCM device activates a safety brake to stop the car and keep it stopped. Installations of UCM solutions with components from different suppliers are subject to certification for each single installation, while certified packages are tested beforehand and guarantee safety without the need to certify each installation.
WITTUR was the first company to supply a certified UCM package with Wittur components in May 2011.
An audience of over 300 people attended this conference, including professionals from the elevator industry, as well as inspectors, construction companies, lifts consulting companies, public institutions and government officials.
READ MORE
Have a look!
Live streaming from Wittur stand at Interlift 2013
Live streaming from Wittur stand at Interlift 2013
READ MORE
Hall 7, stand 7136
Experience Wittur at Interlift 2013
Come to Augsburg Exhibition Centre from Oct. 15th to 18th in Hall 7, stand 7136 and experience Wittur at Interlift 2013!
Wittur will display its wide range of solutions for new installations and modernization as well as a preview of new products that are going to be announced soon. Moreover, a selection of new concepts and new technology from its Research and Development centers will demonstrate Wittur strategy of continuous product development.
Wittur will display its wide range of solutions for new installations and modernization as well as a preview of new products that are going to be announced soon. Moreover, a selection of new concepts and new technology from its Research and Development centers will demonstrate Wittur strategy of continuous product development.
READ MORE
Colorno (Pr), Italy, May 31st 2013
Workshop "Enhancing lift aesthetics in architectural projects"
On May 31st 2013, Wittur held at its plant based in Colorno (Parma, Italy) a Workshop to present the lift integration in architectural designs with hi-aesthetical effect.
Thanks to its long –time experience, Wittur realizes custom-made projects with lift components completely integrated in high-value buildings; Wittur satisfies the functional and aesthetical needs required nowadays by designers and architects, always complying the current regulations.
During the workshop, a huge range of special solutions with hi-aesthetical effect has been presented (full glass and glass framed panels, round panoramic panels…) together with an overview of the most amazing Wittur installations made so far; moreover, it has been organized a visit to the plant to be aware of the quality of the Wittur production system.
Great participation and success for the workshop that it is included in an initiative with more future events aimed at enhancing and increasing Wittur solutions knowledge and application field.
Thanks to its long –time experience, Wittur realizes custom-made projects with lift components completely integrated in high-value buildings; Wittur satisfies the functional and aesthetical needs required nowadays by designers and architects, always complying the current regulations.
During the workshop, a huge range of special solutions with hi-aesthetical effect has been presented (full glass and glass framed panels, round panoramic panels…) together with an overview of the most amazing Wittur installations made so far; moreover, it has been organized a visit to the plant to be aware of the quality of the Wittur production system.
Great participation and success for the workshop that it is included in an initiative with more future events aimed at enhancing and increasing Wittur solutions knowledge and application field.
READ MORE
Moscow, June 6th-8th, 2013
Wittur at Lift Expo 2013
Wittur was present at Lift Expo moscow 2013, the 6th edition of important lift exhibition for the Russian market which was scheduled from June 6th to June 8th.
Visitors of Wittur Stand in Stand C1, Hall A, Pavillion 75 were able to experience:
1. Wittur new Modular MCS1 lift car in a variety of finishes;
2. Wittur Hydra lift door in GOST EI 90 Russian fire certification execution;
3. Wittur Hydra with glass framed panels;
4. MDS1 modular lift door in GOST E30 execution in RAL and stainless steel finish;
5. Wittur Panoramic lift car, 1000 kg.
6. Wittur MRL W Line complete lift package, 630 kg in a panoramic version;
7. A range of Wittur gearless drivers including WSG 29, WSG 25, WSG S3, WSG S2, WSG S1.
We thank all visitors of Wittur stand at Lift Expo Moscow 2013 and we remain at their disposal to supply the best lift solutions for their business.
READ MORE
May 22-23th - ExCeL Exhibition Centre - London
Meet Wittur at Liftex 2013
We are happy to thank all our customers who attended Liftex 2013, the international event for the Lift and Escalator industry.
Wittur Ltd welcomed them at its stand B30 at the ExCeL Exhibition Centre in London from May 22th to May 23th, 2013.
We received an outstanding feedback about the wittur products on display, including:
- MRL W-line lift package
- MDS1 modular door system
- UCM unintended car movement protection package
- S2&S3 gearless machines
Wittur Limited remains at your disposal for any further inquiries from its office in Mold!
Wittur Ltd welcomed them at its stand B30 at the ExCeL Exhibition Centre in London from May 22th to May 23th, 2013.
We received an outstanding feedback about the wittur products on display, including:
- MRL W-line lift package
- MDS1 modular door system
- UCM unintended car movement protection package
- S2&S3 gearless machines
Wittur Limited remains at your disposal for any further inquiries from its office in Mold!
READ MORE
Bratislava, Slovakia
Wittur International Management Meeting 2013
Wittur Management team gathered in Bratislava, Slovakia on April 25th-26th for the IMM - Wittur International Management team.
The team of the local slovakian Wittur production facility welcomed the international guest coming from wittur locations worldwide.
A significant number of persons were participating for the first time as the joined Wittur less then one year ago.
The conference presented Wittur strategy in production, purchasing, sales, marketing. Wittur Academy was also presented to the public. On the second Day, the well-know economist Graeme Maxton presented his views on the future trends of the economic situation. And During the official dinner the Wittur logo was projected next to the Castle of Bratislava, which became for one night a Wittur branded city!
The team of the local slovakian Wittur production facility welcomed the international guest coming from wittur locations worldwide.
A significant number of persons were participating for the first time as the joined Wittur less then one year ago.
The conference presented Wittur strategy in production, purchasing, sales, marketing. Wittur Academy was also presented to the public. On the second Day, the well-know economist Graeme Maxton presented his views on the future trends of the economic situation. And During the official dinner the Wittur logo was projected next to the Castle of Bratislava, which became for one night a Wittur branded city!
READ MORE
April 4th-7th 2013,Tüyap Fair & Congress Center, İstanbul, Turkey
Wittur at Asansör İstanbul 2013
Wittur will be present at Asansör İstanbul 2013, the important lift exhibition scheduled from April 4th to April 7th 2013 at Tüyap Fair & Congress Center in İstanbul, Turkey.
Asansör 2013, held by İFO - İstanbul Fuar Hizmetleri with the support of AYSAD (Association of Elevator and Escalator Industrialists) will see the presence of 400 exhibitors from 37 countries; Wittur is located in Hall 7, Stand D10.
Visitors of Wittur stand will be able to experience the widest range of lift components and solutions, including:
- Wittur MRL W Line machine roomless lift package in EN81-71 Category II vandal resistant execution;
- Wittur MRL W line machine roomless lift package in panoramic execution;
- Wittur MCS1 modular lift car, exhibited in a variety of interior finishes;
- Wittur Osaka round panoramic lift car;
- Wittur MDS1 modular lift door presented in fire resistant EN 81-58 E120 and E30 GOST executions
- Wittur FINELINE reduced thickness lift door for modernization;
- Wittur HYDRA, probably the most successful lift door in the world, in fire-resistant EN81-58 E120 and GOST EI90, EI60 executions;
- A range of Wittur gearless drives including WSG S1, S2, S3 and WSG 08;
- Wittur frequency inverter series GLD;
- Wittur technology for energy efficieny
- Wittur range of Safety gears.
In the context of the Asansör Technical conference program, Wolfgang Adldinger from Wittur is scheduled to deliver a presentation On April 6th at 12:00 – 13:00 in his role of Chairman of Components Committee – ELA. The title of the presentation is “EN 81 + A3 PRACTICES IN GERMANY”.
You are welcome to join Wittur at Asansör 2013!
READ MORE
Wittur Group
Elevator components
Copyright © Wittur 2018 - All rights reserved
Follow us on:
