自1977年来，威特就开始为电梯行业提供多功能、高品质的轿厢门。设计灵活，加上通过了一系列认证，使威特层门能够适应各种应用。有多种表面装饰和规格，因此能适合各种环境：从住宅到高档写字楼、从外部设施到豪华的水上项目、从工业建筑到医院。
Since 1977 Wittur has been providing the lift industry with versatile and high-quality doors. More than 30 years later Wittur is the leading company in the lift doors segment, with state-of-the-art technical solutions and unparalleled product range. Regardless of whatever your lift requires - a round door with panoramic panels rather than a straight or a folding one - Wittur can supply the best solution for your needs.
Wittur offers a wide range of car and counterweight frames. Modularly conceived, these components are very flexible in terms of rated load, height and width. The wide range of accessories includes safety gears, suspension pulleys, compensation chain and travelling cable hangers, allowing configurations suitable for different shaft layouts, lift designs and rated speeds. Wittur can also supply special frames for tailored projects.
创新的解决方案研究和严格的产品质量控制是威特安全部件的主要特色。产品系列包括不定向/双向同步和渐进式安全钳。也可提供上升轿厢超速保护装置。
According to EN81-1/2 A3 and EN81-21 A1 (new lifts in existing buildings), new lifts installed after January 1st 2012 must be equipped with a system to prevent a car moving away from the floor with the landing door not in the locked position and the car door not in the closed position.
所有井道附件对于保证电梯的正常运行和使用寿命都是至关重要的。这正是威特提供以下各种附件的原因：
Since 1977 Wittur supplies the lift industry with versatile and high-quality doors..jpg)
Since 1977 Wittur supplies the lift industry with versatile and high-quality doors.
Since 1977 Wittur supplies the lift industry with versatile and high-quality doors.
创新的解决方案研究和严格的产品质量控制是威特安全部件的主要特色。
威特限制器可覆盖各种额定载荷和速度，能适应无机房机械和传统设施。
我们的限制器可接在滑轮圆周上的任何一点，滑轮磨损小，可延长使用寿命。
适用于中速梯的限速器
OL35-NA, OL35E-NA
- 安全钳向下啮合
- 限速器在上下方向工作
- 整个速度范围内外观尺寸不发生变化
- 可在限速器滑轮任意一点触发
- 保证最小钢丝绳拉力500N
- 拉力通过内建的摩擦制动器向限速器滑轮施加制动扭矩来产生
- 适用于带机房的传统电梯以及MRL电梯
- 有各种远程门机、底座和对重可供选择，提供最大灵活性
- 符合和ASMEA17.1规范要求
阅读更多
适合高速梯的限速器
OL100 / OL120
- 安全钳向下啮合
- 限速器在上下方向工作
- 整个速度范围内外观尺寸不发生变化
- 可在限速器滑轮任意一点触发
- 拉力由钳式夹绳器产生
- 拉力在1100N~2100N之间连续可调
- 适用于带机房的传统电梯以及无机房电梯
- 有各种底座和对重可供选择，提供最大灵活性
- 部件通过指令95/16/EC（电梯）标准认证
- 符合EN81和ASMEA17.1规范要求; 也可与俄罗斯和韩国的型式检验证书.
阅读更多
Wittur Compact tension Weight
CTW
Narrow design and less weight of device makes the CTW the perfect choice for tight space requirements in elevator pits.
阅读更多
