Wittur OL35 / E / M

层门

自1977年来，威特就开始为电梯行业提供多功能、高品质的轿厢门。设计灵活，加上通过了一系列认证，使威特层门能够适应各种应用。有多种表面装饰和规格，因此能适合各种环境：从住宅到高档写字楼、从外部设施到豪华的水上项目、从工业建筑到医院。

轿门

Since 1977 Wittur has been providing the lift industry with versatile and high-quality doors. More than 30 years later Wittur is the leading company in the lift doors segment, with state-of-the-art technical solutions and unparalleled product range. Regardless of whatever your lift requires - a round door with panoramic panels rather than a straight or a folding one - Wittur can supply the best solution for your needs.

限速器

EOS
OL25

创新的解决方案研究和严格的产品质量控制是威特安全部件的主要特色。威特限制器可覆盖各种额定载荷和速度，能适应无机房机械和传统设施。我们的限制器可接在滑轮圆周上的任何一点，滑轮磨损小，可延长使用寿命。

轿厢轿架及对重架

Wittur offers a wide range of car and counterweight frames. Modularly conceived, these components are very flexible in terms of rated load, height and width. The wide range of accessories includes safety gears, suspension pulleys, compensation chain and travelling cable hangers, allowing configurations suitable for different shaft layouts, lift designs and rated speeds. Wittur can also supply special frames for tailored projects.

轿厢

威特的轿厢设计美观，产品种类齐全，配置灵活，安装方便，致力不断满足客户的愿望。

供货范围包括各种载客及载货轿厢，涵盖从住宅到大多数高档建筑等应用领域。

安全装置

创新的解决方案研究和严格的产品质量控制是威特安全部件的主要特色。产品系列包括不定向/双向同步和渐进式安全钳。也可提供上升轿厢超速保护装置。

产品即适合新设备，也适合翻新设备。

UCM 解决方案

According to EN81-1/2 A3 and EN81-21 A1 (new lifts in existing buildings), new lifts installed after January 1st 2012 must be equipped with a system to prevent a car moving away from the floor with the landing door not in the locked position and the car door not in the closed position.
A UCM solution can be certified as a system (type examination certificate) or composed by tested components.
The UCM unit shall detect unintended movement of the car, shall cause the car to stop and keep it stopped.

井道附件

所有井道附件对于保证电梯的正常运行和使用寿命都是至关重要的。这正是威特提供以下各种附件的原因：

导块（滑动或滚轮式）
近程传感器
导轨支架
滑轮
底坑爬梯
缓冲器

液压驱动装置

Since 1977 Wittur supplies the lift industry with versatile and high-quality doors.
Design flexibility, coupled with full range of certifications, makes Wittur landing doors suitable for every application.
A wide variety of available finishings and executions allows them to fit in every environment: from residential to exclusive office buildings, from exterior installations to luxurious marine projects, from industrial buildings to hospitals.

曳引机

系统

MRM W Line

适用于中速梯的限速器

OL35 / E / M

安全钳向下啮合

限速器在上下方向工作

符合EN 81-20/50:2014规范要求

适用于中速梯的限速器

OL35 / E / M

安全钳向下啮合
限速器在上下方向工作
整个速度范围内外观尺寸不发生变化
可在限速器滑轮任意一点触发
保证最小钢丝绳拉力500N
拉力通过内建的摩擦制动器向限速器滑轮施加制动扭矩来产生
适用于带机房的传统电梯以及MRL电梯
有各种远程门机、底座和对重可供选择，提供最大灵活性
部件通过指令95/16/EC（电梯）标准认证
符合EN 81-20/50:2014规范要求

技术性能

Type (900540)			OL35	OL35E	OL35M
travel height (recommendation)	min. max.	TH	- 80 m	- 165 m	40 m 165 m
Max. distance between overspeed governor and tension weight:			85 m	170 m	170 m
Rated speed	d = 6/6,5 d = 8	NS NS	0,3-2,5 m/s 0,36-2,5 m/s	0,3-3,0 m/s 0,36-3,0 m/s	0,3-2,5 m/s
Brake force of the governor	min. max.		> 500 N < 1000 N	> 800 N < 1300 N	>1100 N <1600 N
Tension force of the tension weight	min. max.		250 N 350 N	600 N 800 N	600 N 800 N
Rope pulley diameter		DB	200 / 203 mm 262 mm		200 mm
Weight of OL		max. 25 kg
Rope diameter steel wire rope (DIN EN12385-1/5)		d	6 / 6,5 / 8 mm fibre core or full steel		6 mm full steel
suggested type			6x19 o r8x19		6x19
rope quality	min. max.		1570 N/mm² 1770 N/mm²	1770 N/mm² 1960 N/mm²	1770 N/mm² 1960 N/mm²
Operating temperature				-5°C ... +55°C
Storage temperature				-40°C ... +70°C
Air humidity				<98% / 40°C
Protection classification				IP2x